By Ronald A. Rader, BioPlan Associates, Inc.
Testing for evidence of microbial contamination in bioprocessing has a long history. Generally, any detection of viable, replicable microorganisms requires that a contaminated batch or lot be disposed of. Raw materials, reagents, and sterilized stainless-steel equipment must also be tested and confirmed as not being contaminated. All this can be expensive, slow, and burdensome. So suppliers, testing facilities, and regulators have been seeking improvements.
Microbial testing generally falls into one of three classes:
Classic methods for microbial detection and quantification in samples include culturing bioprocess fluids on agar-gelled semi-solid and in fluid culture media, with these technologies having been used for well over 100 years. Methods promulgated by the U.S. Pharmacopeia (USP) are the minimum requirements or standards that most regulatory agencies worldwide expect from manufacturers.
Classic Culturing Methods Not Well-suited For Bioprocessing
Because biological manufacturing is time sensitive in terms of how long a batch can be held pending test results, bioprocessing needs new methods for testing. Microbial culturing requires considerable time, generally days, to allow sufficient growth of microbes. Among the worst cases, culture-based detection of mycoplasma contamination and bioburden testing can take about two weeks. This can result in unnecessary discarding of lots/batches when test results are not in hand before product hold time limits expire. Products with short viability and shelf lives are most severely affected, including, in particular, cellular and gene therapies where the products may only have usable lives of hours to a few days.
Most facilities outsource microbial testing, particularly tests supporting release of commercial products, to CROs or CMOs, which can further delay obtaining results with conventional methods. Another complication is that many pathogenic organisms or other unacceptable microbes are not suited to culture-based detection methods. Viruses, which require specific live host cells to infect and replicate, cannot be detected by simple culturing or other methods used with bacteria, fungi, etc. This includes retroviruses hiding within host cell DNA/RNA. Other long-used microbial detection and quantification methods include microscopic examination, ranging from use of common light-based microscopes to desktop or much larger electron microscopy systems.
Types Of Microbial Testing
Most of the microbial testing methods used in bioprocessing are much the same as those used for microbial contamination testing in the food and other industries. Testing for microbial contamination involves multiple types:
Testing Is Increasingly Outsourced
Microbial testing is not considered a core bioprocessing task. A large portion of facilities, if not most, outsource this testing, a practice that is expected to increase. The Annual Report and Survey of Biopharmaceutical Manufacturing Capacity and Production, published by BioPlan Associates, shows that analytical testing is perhaps the most common outsourcing activity.1 Figure 1 shows selected survey results regarding the activities that are planned to be significantly more outsourced. “Analytical Testing: Other bioassays,” including microbial testing, was by far the number one area cited. There is also a clear trend of increased planning to outsource testing, growing from 18.3 percent in 2011 to 29.6 percent in 2017.
Figure 1: Outsourcing activities projected to be done at significantly higher levels over next 24 months1
Rapid microbial methods (RMM) loosely refers to testing methods that enable obtaining results relatively faster than classic methods, including those compendial-specified (see http://rapidmicromethods.com). A variety of RMM technologies have been developed, particularly in the past few decades with the advancement of genetic-based testing methods. Types of RMM technologies include:
Overall, compared with conventional methods, RMMs are considered to provide the following benefits:
New Testing Options
Overall, sterility, bioburden, and microbial identification testing are generally considered necessary testing where RMM adoption could be beneficial. The alternatives to RMMs include automating existing compendial testing. However, while this could speed the actual testing process, it does not address the need for faster results. Next-generation sequencing (NGS) genetic-based testing methods are candidates to replace much compendial testing. Companies that have developed RMMs, many of which currently offer related products, include Applied Biosciences/Thermo Fisher, DB Diagnostics Systems, bioMerieux, Mettler Toledo, and Rapid Micro Biosystems. Essentially, all the largest and many other CROs and CMOs offer some RMM-based testing services.
At present there remains some industry hesitation to adopt NGS and other RMMs. As with other regulated areas in bioprocessing, issues associated with the quantity of information these new tests can provide create concerns, because there are few guidelines regarding how to interpret the data. For example, NGS can potentially detect any/all bacterial or virus marker gene sequences in a sample, but what does that mean in terms of actual replicable/living microorganisms and whether batches/lots are actually contaminated, including where conventional methods do not find anything?
RMM Adoption Is Slow
Despite offering significant benefits over existing methods, adoption of RMMs has been slow. Much has been written about the regulatory uncertainties, and this may be a primary hurdle. There are disagreements over the roles industry and regulators should play in adopting RMMs; and with few regulations and precedents, uncertainties persist. Official standard testing methods for pharmaceutical products are developed by the USP in the form of compendia. If a method is not included in the USP compendia, the FDA requires validation for that method as equivalent or better than the compendial methods. But a related problem is that the RMMs are simply different, measuring different parameters and providing different information compared with conventional methods. And this has been complicating comparisons and validation.
The FDA has issued some preliminary regulations and welcomes the adoption of RMMs, but some see its actions as insufficient. Officially, RMMs are part of the FDA’s Process Analytical Technology (PAT) initiative under its Pharmaceutical cGMPs for the 21st Century program (launched in 2002). However, to date, most RMM initiatives come from CBER, the biologics division of the FDA. But CDER, the drugs division that regulates more structurally-definable products, e.g., recombinant proteins/antibodies — now the majority of current biopharmaceutical products — has yet to take much action. This is a source for industry frustration. And regulators worldwide are generally lagging way behind the FDA.
Other serious concerns regarding new method adoption include:
But industry will likely benefit from adopting more RMMs, and with wider adoption these tests may even become compendia accepted. As testing is increasingly outsourced, CROs and CMOs will become critical partners in promoting RMMs. They, along with the biggest manufacturers and cell/gene therapy developers, are potentially the pioneers. Most large biopharmaceutical facilities report they are planning to adopt or are studying adoption of RMMs, but so far few have implemented any. New cellular and gene therapy manufacturers need RMMs the most and will likely be leaders in their adoption, particularly NGS-based testing.
About The Author:
Ronald A. Rader, senior director of technical research at BioPlan Associates, Inc., has 30+ years of experience as a biotechnology, pharmaceutical, and chemical information specialist/analyst. He was editor/publisher of the Antiviral Agents Bulletin, Federal Bio-Technology Transfer Directory, and BIOPHARMA: Biopharmaceutical Products in the U.S. Market.